10 - 18
HAPSITE ER Operating Manual
Figure 10-20 Start Time Updating
Events can be deleted from the template. Click inside the desired cell in the grid
and press the Delete key on the laptop keyboard.
Events can be inserted into the template. Click inside the cell that will precede the
desired event and press the Insert key on the laptop keyboard to insert a row.
NOTE: Rows cannot be inserted after the Standby event
10.6.2 GC Temperature Profile
GC Temperature Profiles specify the column temperature, ramp rate and hold
settings for the HAPSITE ER Method. Adjusting the temperature program will
change the retention times of the internal standards.
To Next Page
Loading...
