Inficon HAPSITE ER - Setting or Changing the Access Level Password

7 - 15
HAPSITE ER Operating Manual
3 To select advanced access, click on Requested Access Level drop-down
menu and select Advanced. If a password has been set, it will need to be
entered in the password box before pressing OK. (See Figure 7-26.)
Figure 7-26 Change Access Level window
4 The current access level of the system is displayed at the bottom right corner
of the ER IQ program, in the Status Bar. (See Figure 7-27.)
Figure 7-27 Current access level shown in system setup screen
7.3.4.1.2 Setting or Changing the Access Level Password
1 To change the Advanced password, first enter advanced mode.
2 Press the Change Password button. (See Figure 7-28.)
Figure 7-28 Change Password button