7 - 16
HAPSITE ER Operating Manual
3 The window shown in Figure 7-29 will be displayed.
Figure 7-29 Change Password window
4 In order to change the password, the correct current password must be entered
in the Old Password box. The Old Password box must be left blank if entering
a password for the first time. The new password must be entered in both the
New Password and Verify New Password boxes. Press OK to set the new
password, or press cancel to exit without resetting the password.
5 Click OK to close the Change Access Level window.
NOTE: ER IQ remembers the last access level when closed. Upon re-opening
the program, the system will default to the last access level utilized. If
a password has been set, the user will be required to enter the correct
password for advanced access. If the password is not known, the user
can select normal access and continue.
7.3.5 View Menu
The View menu is shown in Figure 7-30. It is used to select the desired toolbars.
Figure 7-30 View menu
The Main Toolbar is shown in Figure 7-31. See Table 7-2 on page 7-40 for icon
descriptions.
Figure 7-31 Main toolbar
To Next Page
Loading...
