Inficon HAPSITE ER - Connect the Power Supply

3 - 13
HAPSITE ER Operating Manual
3.2.3 Connect the Power Supply
HAPSITE ER uses an AC to DC power converter power supply. This power supply
connects to HAPSITE ER and a power outlet.
1 The connection with the black cord is fitted with a standard power plug. Plug
this cord into a power outlet. (See Figure 3-21.)
Figure 3-21 Black Cord
2 The connection with the gray cord is fitted with a LEMO connection. (See
Figure 3-22.) When facing the front panel, this cord will plug into the left side of
HAPSITE ER.
Figure 3-22 HAPSITE Power Port
3 Remove the silver plugs from HAPSITE ER. Store the plugs for future use. These
plugs will be necessary when decontaminating the unit. (See Figure 3-23.)
Figure 3-23 Removing the Silver Plugs