8 - 23
HAPSITE ER Operating Manual
3 If a peak has not been identified, click on the arrow above it. The arrow will turn
red. (See Figure 8-46.)
Figure 8-46 Arrow
4 Click Analyze and click Go to NIST MS Program. (See Figure 8-47.)
Figure 8-47 Go To NIST MS Program
5 The spectra will be exported to NIST. NIST will identify the unknown compound.
(See Figure 8-48.)
Figure 8-48 Exporting Spectra to NIST
6 Alternately, if a NIST Search is not desired, select File followed by Go to
Results to return to the Results page.
To Next Page
Loading...
