Inficon SQC-310

5 - 7
PN 074-550-P1D
SQC-310 Operating Manual
On the Instrument window toolbar, click File to display the options to open an
existing database, save the current database file, or save the current database with
a different name.
Interface options between SQC-310 and SQC-310 Comm software are shown in
this window.
OK . . . . . . . . . . . . . . . . . . . . . . . . . . Closes the SQC-310 Instrument window. If
data is still in memory, but it has not been
saved to a disk, a prompt warning that
changes have not been saved will be
displayed.
Download-> . . . . . . . . . . . . . . . . . . . Click to download data from the SQC-310
Comm software to SQC-310. The existing
SQC-310 data will be overwritten.
<-Upload . . . . . . . . . . . . . . . . . . . . . Click to upload data from SQC-310 to the
SQC-310 Comm software. The existing
SQC-310 Comm software data will be
overwritten.
All. . . . . . . . . . . . . . . . . . . . . . . . . . . Select to download/upload processes,
layers, films, materials, and the additional
system setups (Sensors, Sources, Logic,
Inputs, and Relays). Clear to unlock
individual download/upload options.
Processes . . . . . . . . . . . . . . . . . . . . Select to download/upload only processes
and layers. The films and materials will
remain as defined on SQC-310 (for
downloads) or in memory (for uploads).
Films . . . . . . . . . . . . . . . . . . . . . . . . Select to download/upload all films. Click
Edit >> Films... to display or edit films. The
processes and materials will remain as
defined on SQC-310 (for downloads) or in
memory (for uploads).
Materials . . . . . . . . . . . . . . . . . . . . . Select to download/upload all materials.
Click Edit >> Materials... to display or edit
materials. The processes and films will
remain as defined on SQC-310 (for
downloads) or in memory (for uploads).