5 - 22
PN 074-550-P1D
SQC-310 Operating Manual
Search at Start . . . . . . . . . . . . . . . . Automatically sends the Hello command (@)
over the last selected communications
method when the SQC-310 Comm software
is launched. This checkbox option is saved
when the Close button is clicked. If the
SQC-310 Comm software is used often
without being connected to SQC-310, clear
this option.
Use Checksum . . . . . . . . . . . . . . . . Communications between the SQC-310
Comm software and SQC-310 include a
checksum to verify data integrity. This option
should remained selected unless instructed
to do otherwise by support personnel.
Send(Command) . . . . . . . . . . . . . . Sends the command entered into the
command box via communications to
SQC-310. Message length and checksum (if
used) are automatically calculated and sent.
Type commands in ASCII format (refer to
section 4.2, SQC-310 Communications
Protocol, on page 4-9 for details).
Response . . . . . . . . . . . . . . . . . . . . The response from SQC-310 is displayed in
this dialog box. Responses will be displayed
in ASCII format (refer to section 4.2,
SQC-310 Communications Protocol, on
page 4-9 for details).
5.8 View Menu
On the Main window toolbar, click View to display a series of options for different
Main window graphs available. Selecting a graph will replace the current Main
window graph. An option for a Sensor Readings window is also available.
Output Rate Graph . . . . . . . . . . . . . On the Main window, displays the output rate
over time.
Output Deviation Graph. . . . . . . . . On the Main window, displays the output
deviation over time.
Output Power Graph . . . . . . . . . . . On the Main window, displays the output
power over time.
Sensor Rate Graph. . . . . . . . . . . . . On the Main window, displays the individual
sensor rates over time.
To Next Page
Loading...
Need help?
General
