5 - 6
PN 074-550-P1D
SQC-310 Operating Manual
5.5 Instrument Window
The Instrument window is used to edit processes, films, materials, and other
SQC-310 setup data. In the Main window toolbar, click Edit >> Instrument... to
display the Instrument window. When Edit >> Instrument is selected in the Main
window toolbar, the configuration from SQC-310 is downloaded if communications
have been successfully established (refer to Chapter 4, Communications). The
Read Instrument window will be displayed with a status bar for the upload progress.
Figure 5-3 Read Instrument window
Once the configuration is loaded or an existing database is opened, the Instrument
window will be displayed and the name of the configuration will replace [Instrument
Upload] in the window title bar.
Figure 5-4 Instrument window
NOTE: It is important to keep in mind that data edited here is only held in memory,
it is not automatically saved or downloaded. Click File >> Save Database
or Save As Database to save the data in memory to a *.mdb file or Select
the ALL checkbox and click Download-> to send any configuration
(database) changes to SQC-310.
To Next Page
Loading...
