Inficon SQC-310 User Manual

4 - 8
PN 074-550-P1C
SQC-310 Operating Manual
5 Select Use the following IP address, then enter the IP address and Subnet
mask displayed in Figure 4-8, and click OK. With this selection, the computer
is assigned an IP address to use when communicating with SQC-310.
Figure 4-8 Entering the IP address and Subnet mask
6 Click OK in all open dialog boxes to close the Internet Protocol setup for the
Local Area Connection. Open the SQC-310 Comm software and confirm
communications (see section 5.7, Communications Setup Menu, on page
5-20).
4.1.3.2 How to change the SQC-310 IP address
The IP address can be changed using the Digi Discover software (digdscvr.exe)
placed in the SQC-310 directory (typically C:/Program Files/INFICON/SQC-310
Comm) during SQC-310 Comm installation.
To change the IP address:
1 Run dgdiscvr.exe and find SQC-310.
2 Double-click on SQC-310.
3 Enter User Name: root and Password: dbps.
4 Click Login.
5 Click Configuration, Network and Set.
6 Change IP=192.168.1.200 to the new IP address.
7 Click Apply, then Log Out. The new IP address is now configured.

Inficon SQC-310 Specifications

General

Brand	Inficon
Model	SQC-310
Category	Controller
Language	English