Inficon SQC-310 User Manual

4 - 22
PN 074-550-P1C
SQC-310 Operating Manual
4.3.7.1 Get/Set Input and Relay Parameter Examples
Get input 1 and input 2 functions:
Command: !(G? 1 2(131)(40)
Response: !*A1,3 2,4(156)(152)
Set input 1 and input 2 functions to Start Layer and Stop Layer:
Command: !,G1 1,2 3,4 (56)(34)
Response: !*A20,25(140)(82)
Get the active level and pin number for input 1:
Command: !*GA1? 2 3(112)(143)
Response: !,A2,0 3,1 (90)(108)
Get the type and pin number for relay 1:
Command: !*GB1? 2 5(121)(129)
Response: !,A2,0 5,1 i (105)(135)
Get the current input 1and relay 1 state:
Command: !)GC1?1 2(58)(97)
Response: !(A2,0 (58)(124)
To override relay 1:
Command: !'GD1 1(107)(46)
Response: !$A5 (53)(151)
To lock relay 1 in the on position:
Command: !'GE1 1(132)(99)
Response: !$A5 (53)(151)
Once locked in either the on or off position, the relay can only be controlled using
remote communications.

Inficon SQC-310 Specifications

General

Brand	Inficon
Model	SQC-310
Category	Controller
Language	English