Inficon SQC-310 User Manual

2 - 8
PN 074-550-P1D
SQC-310 Operating Manual
2.7 Rack Mount
The procedure below provides instructions for installing the SQC-310 rack mount
kit. SQC-310 is designed to mount in a standard 48.3 cm (19 in.) rack, using
optional rack mount kits, or can be used on a benchtop.
2 rack mount kits are available:
 Full Rack Extender (PN 782-900-007)
 Rack Adapter (PN 782-900-016)
2.7.1 Full Rack Extender
The optional Full Rack Extender (PN 782-900-007) mounts a single SQC-310 into
a full-width 48.3 cm (19 in.) rack space.
2.7.1.1 Inventory
 2 - rack mount ears
 2 - large black aluminum panels
 2 - small black aluminum panels
 2 - hex shoulder screws
 8 - small flat head screws
 4 - large flat head screws

Inficon SQC-310 Specifications

General

Model	SQC-310
Category	Controller
Type	Thin Film Deposition Controller
Measurement Technology	Quartz Crystal Microbalance (QCM)
Channels	1
Input Voltage	100-240 VAC
Operating Temperature	15 to 35°C
Measurement Principle	Quartz Crystal Microbalance (QCM)
Sensor Compatibility	Inficon QCM Sensors
Power Requirements	50/60 Hz
Communication Interfaces	RS-232
Storage Temperature	-20 to 70 °C