Chapter 2: Installation
Ambient Conditions
Eclipse User Guide 2.0 43/ 526
Ambient Conditions
Proper operation of the Eclipse system components can only be
guaranteed at the following ambient temperatures:
Component Ambient Operating Temperature
Control Surface between 50°F and 95°F (10°C and 35°C)
DioCore between 50°F and 90°F (10°C and 32°C)
Warning
• Do not store or use the device at extreme temperatures,
or in an environment with exposure to vibration, dust or
humidity.
• Do not block the ventilation holes when operating the
device. Blocked ventilation holes are a fire hazard. Be
especially careful if you are using the console while it
remains in the lower half of its flight-case.
• Do not place the device (console or audio rack) too
close to strong electromagnetic radiation sources (video
monitors, high-voltage cables, etc.), as this might cause
a degradation of audio quality via induced currents in the
connections and frame.
• Using a mobile telephone near the device may induce
noise and disturbance.
To Next Page
Loading...
