Chapter 6: Console Configuration
Inserts
Eclipse User Guide 2.0 309/ 526
Inserts
On input channels, inserts are always pre-fader, and the
inserted device can be:
• An external device connected to any input/output pair.
• An internal effects bay provided by the FM8-VB card.
On output channels, inserts can be pre-fader or post-fader, and
the inserted device can be:
• An external device connected to any input/output pair.
• An internal effects bay provided by the FM8-VB card.
• One of the 16 floating DSP resources.
Note that on output channels you can use both insert points.
For example, to insert a floating DSP resource pre-fader and
then an internal effects bay post-fader.
In either case, the first operation is to configure the external
device or internal effects bay as an insert. Note that the floating
DSP resources are always available as inserts for output
channels without any pre-configuration.
To Next Page
Loading...
