Chapter 4: Getting Started (The Standard Template)
Default Bus Routing
Eclipse User Guide 2.0 99/ 526
Default Bus Routing
You can interrogate or modify your bus routing using either
Forward or Reverse Bus assign, see Page 74.
You will see that all input channels are routed to:
• The stereo Master
• All four stereo Auxes (Faders 41 to 44); these sends are
prepared as pre-fader sends.
• All four mono FX sends (Smart Panel Layer A); these
sends are prepared as post-fader sends.
There are no routing assignments to any VCAs or Matrix
outputs.
If you want to know more about Mix Busses, see Page 159.
For details on Aux (and Matrix) sends, see Page 163.
For the moment we will assume that you are working with the
basic routing loaded by the Templ1.
To Next Page
Loading...
