Chapter 3: Operating Principles
Smart Panel “Strips”
64/ 526 2.0 Eclipse User Guide
Smart Panel Controls
The operation of each Smart Panel controller is very similar to a
Fader strip; the following functions are identical:
• VU Meter
• MUTE
• Label
• SEL
• ID
Level and CUE functions are operated as follows:
Level Control and Lvl Indicator
1. Turn the rotary control to adjust channel level.
The Lvl meter indicates the current level using a single green
LED.
As for Fader strips, the Smart Panel rotary controls may adjust
either the main channel level or an Aux/Matrix send level.
CUE
1. Press down on the rotary control to turn Cue on or off.
When active the CUE LED lights.
Note that a Smart Panel “strip” has no separate rotary control
for Gain/Pan/User. To control these functions, you must assign
the Smart Panel controller to the Selected Channel.
To Next Page
Loading...
