INDEX
DACS-W INSTRUCTION MANUAL INDEX
1
A
Access Level Change 5-5, 5-9
Actual Speed Zoom 5-5, 5-13
ADDITIONAL FUNCTIONS 8-1
All Lot Totals 5-5
Auto Lots Total Time 5-8, 5-30
Auto Printout 5-8, 5-27
B
Bar Graph Display 5-13
Batch
Total Count 5-8, 5-29
Total Time 5-8, 5-29
Batch Analysis 5-8, 5-28
Batch Column Auto Printout 5-8, 5-28
Belt Tension Adjustment 9-5
C
C key 4-3
Changing the Access Level 5-12
Changing to the Installation Engineer Level 8-7
Changing to the Operator Level 5-9
Changing to the Site Engineer Level 5-10
Checkweigher Production 6-5
CLEANUP PROCEDURES 7-1
Clear All Totals 5-5, 5-8
Clear Batch Totals 5-5, 5-8
Clear Batch Totals and Clear All Totals 5-14
Continuous N/G Count 5-8, 5-25
Continuous N/G Signal 8-20
Continuous N/G Stop 8-5, 8-20
Control Pulse 11-3
Control Pulse freq 11-23
Correction after Data Entry and Setting 5-2
Cout. N/G Output Sig. 8-5
Current Batch Total 5-5
Current Log Total 5-5
D
Daily Inspection 9-2
Data Displays 5-13
Data Entry 5-2
Data Entry Procedure 5-2
Date and Time Setting 8-26
Date Setting 8-6, 8-27
Date/Time Setting 8-6
Display Panel 2-4
Double Item Error 10-3
Double Item Output Signal 8-17
Double Item Rej. Dir. 8-4
Double Item Reject Direction 8-12
Double Item Signal 8-4
Drive Power Shutdown and Indication 1-7
DYNAMIC CALIBRATE 4-4
Dynamic Calibration 5-8, 5-23, 8-6, 8-24
E
Emergency Stop and Restart 6-2
End Print Job 5-5
End Production 6-8
Equipment Malfunction 10-4
Error Message 11-7, 11-13, 11-23
Error Message Handling 10-2
EXIT key 4-3
Ext. Input 1 Delay 5-7
Ext. Input 2 Delay 5-7
Ext.1 Output Signal 8-4
Ext.1 Rej. Direction 8-4
Ext.2 Output Signal 8-4
Ext.2 Rej. Direction 8-4
External 1 Output Signal 8-15
External 1 Reject Direction 8-11
External 2 Output Signal 8-16
External 2 Reject Direction 8-11
F
FB% 11-6, 11-22
FBC 11-2, 11-9, 11-19
FBC Target Weight 11-3, 11-10, 11-20
FBC Unused Range - 11-5, 11-11, 11-21
FBC Unused Range + 11-4, 11-11, 11-21
Feed Conv. Speed 5-7
To Next Page
Loading...
Need help?
General