2
INDEX DACS-W INSTRUCTION MANUAL
Feed Conveyor Error(Overload) 10-3
Feed Conveyor Error(Pulse malfunction) 10-3
Fuse Replacement 9-6
G
Gap Control 8-6, 8-25
General Precautions to be Observed 1-3
H
Histogram 5-5
Histogram Display 5-13
I
Indicator Lamp Functions 4-4
Infeed Conveyor 2-4
INFO key 4-3
Inspection during Production 9-2
INSTALLATION 3-1
Installation Engineer Level 5-3
Installation Engineer Level (Level 2) Password
Setting 8-29
Installation Engineer Level Functional Configuration
8-2
Installation Engineer Level Functions 8-8
Installation Location & Environment 3-2
INTRODUCTION 2-1
K
Key Functions 4-3
L
Last 27 Weight Data 5-5
last 27 Weight Data Display 5-13
Left Rejector Error 10-2
Level 1 Password Setting 8-6
Level 1&2 Password Setting 8-6
Level 2 Password Setting 8-6
Low Battery Voltage 10-4
Lower Limit 5-7, 5-18
M
Main Components 2-3
main power switch 6-2
Maintenance and Inspection Procedures 9-3
Metal Detect Delay 5-7
Metal Detect Rej. Dir. 8-4
Metal Detect Reject Direction 8-10
Metal Detection 5-8, 5-22, 8-5, 8-22
Metal Detection Output Signal 8-15
Metal Detection Signal 8-4
Model Specifications 2-2
N
NET 4-4
NORMAL OPERATIONS & FUNCTIONS 5-1
O
Ok-Lower Limit - 11-26
Ok-Over Wt. Rej. Dir. 11-26
Ok-Over Wt. SIgnal 11-27
Ok-Under Wt. Rej. Dir. 11-27
Ok-Under Wt. Signal 11-28
Ok-Upper Limit + 11-25
Operation Outline 2-5
Operation Panel 2-4, 4-2
Operational Levels 5-3
Operator Level 5-3
Operator Level Functions 5-11
OPTION 11-1
Outline of Production Sequence 6-3
Output Signal 1 Delay 5-7
Output Signal 1 ON Time 8-5, 8-18
Output Signal 2 Delay 5-7
Output Signal 2 ON Time 8-5, 8-18
Output Signal 3 Delay 5-7
Output Signal 3 ON Time 8-5, 8-19
Output Signal 4 Delay 5-7
Output Signal 4 ON Time 8-5, 8-19
OVER 4-4
Over Weight Accept 5-8, 5-22
Over Weight Output Signal 8-13
Over Weight Reject Direction 8-9
Over Weight Signal 8-4
Over Wt. Rej. Dir. 8-4
Over(weight) 2-2