1 SAFETY DACS-W Operation Manual
1-4
• Make sure to use the power supply specified in the checkweigher specification sheet or plate.
If incorrect power supply is used, equipment damage may result.
• Do not apply excessive pressure to the power cord by placing this equipment or any objects on it.
There is possibility of power cord disconnected.
• Do not power off the checkweigher during production except when emergency stop is required
because the setting or statistics data may break.
• Do not run the equipment with any tools or other objects placed on top of the machine. If objects fall
into moving parts, damage to equipment may result.
• Use finger to press the display keys on the operation panel. Using a ball-point pen or other pointed
object can damage the operation panel.
To Next Page
Loading...
Need help?
General