IMPORTANT CONSIDERATIONS
(1)
IMPORTANT CONSIDERATIONS
1. Due to recent developments in the weighing industry, such as new materials processing methods and
increased production speeds, the hidden hazards involved with handling weighing equipment have
multiplied.
It is impossible to enumerate or predict all of the possible dangers of using this equipment. Likewise,
there are far too many operations which cannot or should not be performed to fully list all of them in
an operation manual. Please assume that any operations not specifically described should never be
performed.
Safety countermeasure should be carefully considered and implemented before performing any
operation, service or maintenance procedures not specifically described in this manual or indicated
on the machine itself.
2. The copyright for the material in this document is held by Ishida Company Ltd. Accordingly, any
disclosure to third parties or unauthorized copying of the diagrams or technical information
contained herein is not permitted.
3. Any questions or inquiries for additional information should be directed to Ishida Company, Ltd. or
its local distributor/representative.
Operators and other personnel who handle this equipment must be
aware of the hazards involved. These dangers may not be obvious, so
that it is imperative to follow the instructions detailed in this manual
when operating the machine or performing servicing, maintenance
inspection, etc. For this, be sure to read and understand the contents
of this manual thoroughly before proceeding.
Ishida Company, Ltd. does not accept responsibility for any damage,
loss or injuries which result from incorrect operation, insufficient
caution, unauthorized modifications to the equipment, or failure to
follow the instructions contained in this manual.
To Next Page
Loading...
Need help?
General