EasyManuals Logo

Kuka IONTEC KR 20 R3100 User Manual

Kuka IONTEC KR 20 R3100
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
may exist. Instruction must be carried out regularly. Instruction is also re-
quired after particular incidents or technical modifications.
Personnel includes:
System integrator
Operators, subdivided into:
Start-up, maintenance and service personnel
Operating personnel
Cleaning personnel
System integrator
The industrial robot is safely integrated into a complete system by the sys-
tem integrator.
The system integrator is responsible for the following tasks:
Installing the industrial robot
Connecting the industrial robot
Performing risk assessment
Implementing the required safety functions and safeguards
Issuing the EC declaration of conformity
Attaching the CE mark
Creating the operating instructions for the system
Operators
The operator must meet the following preconditions:
The operator must be trained for the work to be carried out.
Work on the system must only be carried out by qualified personnel.
These are people who, due to their specialist training, knowledge and
experience, and their familiarization with the relevant standards, are
able to assess the work to be carried out and detect any potential
hazards.
3.3 Workspace, safety zone and danger zone
Workspaces are to be restricted to the necessary minimum size. A work-
space must be safeguarded using appropriate safeguards.
The safeguards (e.g. safety gate) must be situated inside the safety zone.
In the case of a stop, the manipulator and external axes (optional) are
braked and come to a stop within the danger zone.
The danger zone consists of the workspace and the stopping distances of
the manipulator and external axes (optional). It must be safeguarded by
means of physical safeguards to prevent danger to persons or the risk of
material damage.
3.4 Overview of protective equipment
The protective equipment of the mechanical component may include:
Mechanical end stops
Mechanical axis limitation (optional)
Release device (optional)
Brake release device (optional)
KR IONTEC
MA KR IONTEC V4 | Issued: 11.05.2021 www.kuka.com | 23/344
Safety

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kuka IONTEC KR 20 R3100 and is the answer not in the manual?

Kuka IONTEC KR 20 R3100 Specifications

General IconGeneral
Payload20 kg
Reach3100 mm
Repeatability±0.06 mm
Number of Axes6
ControllerKR C4
Protection RatingIP65
Mounting PositionFloor, ceiling, wall

Related product manuals