Material Subassembly, component Additional information
Electronic components,
such as RDC, EDS, etc.
Dispose of as electrical
scrap without disassem-
bling
Motors Dispose of motors without
dismantling them.
Plastics
ABS Enclosure panels, covers
ETFE Flexible tube
FKM Shaft sealing rings
NBR O-rings
PA Hinged clamps
PE End stop buffers
PU Hoses
PUR Cable sheaths
Auxiliary substances and consumables
Gear oil Gear units Optigear Synt. ALR 150
Optigear ALR 320
Adhesive
and sealant
Base frame, rotating col-
umn, link arm
Adhesive and sealant Drei
Bond type 1305
Rotating column, arm, in-
line wrist
Adhesive and sealant Drei
Bond type 1342
Base frame, rotating col-
umn, link arm, arm, in-line
wrist
Adhesive and sealant Drei
Bond 5204HV
Lubricating
grease
Gear teeth Microlube GL 261 grease
Cabling Lubricating grease Opti-
temp RB2
Rolling-contact bearing
grease
PETAMO GHY 133 N lubri-
cating grease
Up-to-date safety data sheets must be requested from the manufacturers
of auxiliary and operating materials. Further information about the auxiliary
substances and consumables used can be found under:
(>>> 12.2 "Auxiliary and operating materials used" Page 336).
KR IONTEC
MA KR IONTEC V4 | Issued: 11.05.2021 www.kuka.com | 317/344
Decommissioning, storage and disposal
To Next Page
Loading...
