2MN/2N1
1-3-86
U199 Displaying fuser heater temperature
Description
Displays the detected fuser temperature.
Purpose
To check the fuser temperature.
Method
1. Press the OK key. The fuser temperature is displayed.
Completion
Press the Back key. The screen for selecting a maintenance mode No. is displayed.
U207 Checking the operation panel keys
Description
Checks operation of the operation panel keys.
Purpose
To check operation of all the keys and LEDs on the operation panel.
Method
1. Press the OK key.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Heat Edge1 Heat roller edge temperature (°C)
Heat Edge2 Heat roller edge temperature (°C)
Heat Center Heat roller center temperature (°C)
Press Center Press roller center temperature (°C)
To Next Page
Loading...
Need help?
General