2MN/2N1-1
1-3-141
U917 Setting backup data reading/writing
Description
Retrieves the backup data to a USB memory from the machine; or writes the data from the USB
memory to the machine.
Purpose
To store and write data when replacing the HDD.
Method
1. Perform shut-down on the operation panel, turn power off (see page p.1-2-19).
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
Wait for 10 seconds to allow the machine to recognize the USB memory.
4. Enter maintenance item U917.
5. Select [Import] or [Export].
6. Select the item.
* : Since data are dependent with each other, data other than those assigned are also
retrieved or written in.
7. Press the OK key. Starts reading or writing.
The progress of selected item is displayed in %.
When an error occurs, the operation is canceled and an error code is displayed.
8. When normally completed, [Finish] is displayed.
9. Turn the main power switch off and on after completing writing when selecting [Import].
Item No. Description
Display Description
Import Writing data from the USB memory to the machine
Export Retrieving from the machine to a USB memory
Display Description Depending data
Job Account Job accounting -
User User managements Job accounting
Document Box Document box information Job accountings and user manage-
ments
To Next Page
Loading...
Need help?
General