2MN/2N1-1
1-3-22
U001 Exiting the maintenance mode
Description
Exits the maintenance mode and returns to the normal print mode.
Purpose
To exit the maintenance mode.
Method
1. Press the OK key. The normal print mode is entered.
U002 Setting the factory default data
Description
Restores the machine conditions to the factory default settings.
Purpose
Method
1. Press the OK key.
2. Select [Mode1(All)].
3. Press the OK key.
4. Exit the maintenance mode, perform shut-down, and turn the main power switch to off and on
again. Allow more than 5 seconds between Off and On.
* : An error code is displayed in case of an initialization error.
When errors occurred, turn main power switch off then on, and execute initialization using
maintenance item U002.
Error codes
Item No. Description
Codes Description
0001 Entity error
0002 Counter error
0003 OS error
0020 Engine error
To Next Page
Loading...
Need help?
General