Repair information 4-147
5062
Waste toner container removal
1. Open the front access door.
2. Open the standard media tray.
3. Flip the green handles forward and pull out the waste toner container.
Waste toner gears removal
See “Rear” on page 7-15 for the part number.
1. Remove the EP drive. See “EP drive assembly removal” on page 4-54.
2. Remove the E-clip (A) from the larger gear, and remove the gear.
3. Remove the E-clip (A) from the smaller gear, and remove the gear.
To Next Page
Loading...
