Lexmark C792e 5062-210 - Staplesmart Finisher and High-Capacity Output Stacker; Finisher or Stacker Access Door Beacon LED and Beacon Housing Removal; Finisher or Stacker Bin-Full Spring Removal

Repair information 4-243
5062
StapleSmart finisher and High-capacity output stacker
Finisher or stacker access door beacon LED and beacon housing removal
See “Finisher assembly” on page 7-23 for the part number.
1. Remove the option from the printer.
2. Remove the left access door assembly. See “Finisher or stacker left access door assembly removal”
on page 4-250.
3. Remove the screw (A), and remove the beacon card.
Finisher or stacker bin-full spring removal
See “Finisher assembly” on page 7-23 for the part number.
1. Remove the option from the printer.
2. To remove the front spring, remove the front cover. See “Finisher or stacker front cover removal” on
page 4-248.
To remove the rear spring, remove the controller card. See “Finisher or stacker controller card
assembly removal” on page 4-245.