2-54 Service Manual
5062
956.00–956.99
System Card Failure
A processor failure has occurred. • POR the printer.
• If the error message persists, go to “956.xx—
System board failure service check” on
page 2-109.
957.00–957.99
System Failure
An ASIC failure has occurred. • POR the printer.
• If the error message persists, replace the
system board. See “System board removal”
on page 4-142.
958.00–958.99
Memory Failure
A processor failure has occurred. • POR the printer.
• If the error message persists, replace the
system board. See “System board removal”
on page 4-142.
959.00–959.05
Engine Code Error
Invalid engine code has been
detected.
• POR the printer.
• If the error message persists, download the
engine code again.
• POR the printer again.
• If the error message persists, replace the
system board. See “System board removal”
on page 4-142.
959.20–959.28
System Failure
A system board failure has occurred. • POR the printer.
• If the error message persists, replace the
system board. See “System board removal”
on page 4-142.
960.00–960.99
Memory Error
A memory failure has occurred. • POR the printer.
• If the error message persists, RAM soldered on
board is bad. Replace the system board. See
“System board removal” on page 4-142.
961.00–961.99
Memory Failure
A memory failure has occurred. • POR the printer.
• If the error message persists, RAM soldered on
board is bad. Replace the system board. See
“System board removal” on page 4-142.
964.00–964.99
Emulation Error
A CRC error with Download Emulation
(DLE) has occurred.
• POR the printer.
• Download code a second time.
975.00–975.99
Network Error
The system detected an
unrecognizable network port.
Contact your next level of support.
976.00–976.99
Network Error
The system detected an
unrecoverable software error in
network port.
Contact your next level of support.
982.00–982.12
<device>
Communication Error
A communications error by the
specified device has occurred.
1. Turn the power off.
2. Remove, and reinstall the output option.
3. Turn the main power back on.
4. Check all output option interface connections if
the problem remains.
990.00–990.29
Option Error
An option error has occurred. Contact your next level of support.
990.01 Service Tray2 An input option error has occurred. Go to “990.01—POST error (2000-sheet input
option) service check” on page 2-109.
Error code Description Action
To Next Page
Loading...
