363-206-204
Introduction
Issue 9 October 1998
1-7
Table 1-2. Tools, Test Sets, and Accessories
Notes
:
1. The multimeter must be capable of measuring DC voltage in the 40 to 60 volt range.
2. Available from Sanchem Inc., Chicago, IL. Required if the bay has been scraped to make
the ground connection.
3. The crimping tool and wire stripper only are required if installing the Group 327 or 332
cable. The replacement cassette is for the wire stripper tool.
4. A wire-wrap gun is required to make connections on the DS1, alarm, and telemetry
cables. The wire-wrap gun must be able to accommodate 22 or 26 gauge wire.
‡. Registered trademark of Panduit Corporation.
Description
Commercial or
Comcode
Notes
Multimeter 1
Screwdriver with Appropriate Head(s)
Soldering Iron
Anti-Oxidation Material NO-OX-ID
"A" Compound
2
Thomas & Betts
*
Crimping Tool
*. Registered trademark of Thomas & Betts corporation.
WT-414
3
Paladin
â€
Coaxial Wire Stripper
†. Registered trademark of Paladin Corporation.
PA1208
Replacement
Paladin
Cassette PA2201
ESD Wrist Strap 900486994
Wire-wrap Gun 4
Fuse Extraction Tool 406420273
Optical Fiber Cables with
ST
®
Connectors
on Each End (Min. of 2)
105357727
5,6,8
DSX-1 Patch Cords (Min. of 4)
DSX-3 Patch Cords (Min. of 2)
MS-DOS
‡
Compatible PC (Required)
‡. Registered trademark of Microsoft Corporation.
9
Canned Air Duster (Optical Quality)
Absorbond Cleaner (300 Wipes/Pkg.) 900709379
963TR 1038A Contact Hand Tool 106077654
PANDUIT
Duct Notching Tool DNT-100 7
To Next Page
Loading...
Need help?
General
