Manitowoc 2250 Service Maintenance Manual

Reference Only
©2016 Manitowoc
Published 07-19-16, Control # 249-01
SERVICE/MAINTENANCE MANUAL
This manual has been prepared for and is considered part of -
2250
Model Number
XXXXXREF
Serial Number
This manual is divided into the following Sections:
SECTION 1 INTRODUCTION
SECTION 2 HYDRAULIC AND AIR SYSTEMS
SECTION 3 ELECTRICAL SYSTEM
SECTION 4 BOOM
SECTION 5 HOISTS
SECTION 6 SWING
SECTION 7 POWER TRAIN
SECTION 8 UNDERCARRIAGE
SECTION 9 LUBRICATION
SECTION 10 TROUBLESHOOTING
NOTICE
The serial number of the crane and applicable attachments (Luffing Jib, MAX-ER
®
) is
the only method your Manitowoc dealer or the Manitowoc Crane Care Lattice Team
has of providing you with correct parts and service information.
The serial number is located on a crane identification plate attached to the operator’s
cab and each attachment. Refer to the Nameplate and Decal Assembly Drawing in
Section 2 of this manual for the exact location of the crane identification plate.
Always furnish serial number of crane and its attachments when ordering parts or
discussing service problems with your Manitowoc dealer or the Manitowoc Crane Care
Lattice Team.
To prevent death or serious injury:
• Avoid unsafe operation and maintenance.
Crane and attachments must be operated and maintained by trained and
experienced personnel. Manitowoc is not responsible for qualifying these
personnel.
• Do not operate or work on crane or attachments without first reading and
understanding instructions contained in Operator Information Manual and
Service Manual supplied with crane and applicable attachments.
• Store Operator Information Manual and Service Manual in operator’s cab.
If Operator Information Manual or Service Manual is missing from cab,
contact your Manitowoc dealer for a new one.
WARNING
1
4
5
6
7
8
2
3
9
10

Manitowoc 2250 Specifications

General

Brand	Manitowoc
Model	2250
Category	Construction Equipment
Language	English