Edition: 08/2013
Foreword
The information in this manual refers to equipment supplied by:
MATRIX MACHINE TOOL (COVENTRY) LIMITED
Matrix House, A2 Earlplace Business Park
Fletchamstead Highway, Coventry, CV4 9XL
UNITED KINGDOM
sales@matrix-machine.com
http://www.matrix-machine.com
Preface
The Health & Safety section of this manual must be read and all safety related precautions
observed before proceeding with the installation of this machine.
Support
Tel: +44 (0)2476 718 886
Fax: +44 (0)2476 678 899
Email: aftersales@matrix-machine.com
If you have any queries or suggestions regarding the 0850 User Manual, please contact our
Technical Publications Department: publications@matrix-machine.com
This manual describes the use of the 0850 External Thread Grinder. Any options taken or
deviations from the standard are documented in each machines individual set of manuals.
Matrix Machine Tool (Coventry) Limited reserves the right to modify its products without
notification and consequently to supply machines which are not in every detail in accordance
with the descriptions and procedures in this publication.
(This manual was written using Calibri font , size 12)
To Next Page
Loading...
