Matrix 0850 - Page 5

0850/0850-T1 User Manual
Matrix Machine Tool (Coventry) Limited 5 / 231
Edition: 08/2013
[ROTATE]
Workpiece continuous rotate
[TAILSTOCK
ADV/RET]
Tailstock advance/retract toggle
[STEADY
OPEN/CLOSE]
Workpiece steady open/close toggle
[PROBE
ADV/RET]
Probe advance/retract toggle
WARM
UP
[WARM-UP]
Machine warm-up cycle select
X
[X]
machine X axis select
Z
[Z]
machine Z axis select
C
[C]
machine C axis select
A
[A]
machine A axis select
W2
[W2]
tailstock axis select
Menu selection
">" is used to denote the sequence of softkey presses required to get a specific screen.
Example: Matrix > Main Menu > Part Data