25.2 Preparatory Procedures for Monitoring
25.2.1 Installing OS onto GOT
25 - 5
25
BAR CODE READER
CONNECTION
26
CNC CONNECTION
27
MULTI-CHANNEL
FUNCTION
28
FA TRANSPARENT
FUNCTION
29
MULTIPLE-GT11
CONNECTION FUNCTION
30
GATEWAY FUNCTION INDEX
25.2.1 Installing OS onto GOT
Install the extended function OS onto the GOT.
For the OS installation methods, refer to the following manual.
GT Designer2 Version Basic Operation/Data Transfer Manual
1 Check-mark a extended function OS (Barcode), and click the button.
Check the following under the Communication driver.
• Depends on the connection type
Place a check mark in the box of the following item in
the extended function OS.
• Barcode
Install
To Next Page
Loading...
