27.4 Ethernet Connection
27.4.10 CNC Side Settings
27 - 81
25
BAR CODE READER
CONNECTION
26
PRINTER CONNECTION
27
CNC CONNECTION
28
MULTI-CHANNEL
FUNCTION
29
FA TRANSPARENT
FUNCTION
30
MULTIPLE-GT11
CONNECTION FUNCTION
31
GATEWAY FUNCTION INDEX
(b) Example of GX Developer setting
*1 For details of the parameter setting, refer to the following.
MELDAS C6/C64 NETWORK MANUAL BNP-B2373
IP address setting
IP address setting on GX Developer is invalid.
Set the IP address by the 7-segment LED and rotary switch of the CNC side,
referring to the next page.
To Next Page
Loading...
