31 - 1
31
25
BAR CODE READER
CONNECTION
26
PRINTER CONNECTION
27
CNC CONNECTION
28
MULTI-CHANNEL
FUNCTION
29
FA TRANSPARENT
FUNCTION
30
MULTIPLE-GT11
CONNECTION FUNCTION
31
GATEWAY FUNCTION INDEX
GATEWAY
FUNCTION
31.1 System Configuration . . . . . . . . page 31 - 2
This section describes devices and cables needed for the
gateway function.
Refer to this section to select the desired system.
31.2 Preparatory Procedures for Monitoring . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . page 31 - 6
This section describes the preparatory procedures for
connecting to the Ethernet and monitoring the connected
device.
The sequential checkup procedure will be helpful for those
who communicate through the GOT for the first time.
31.3 List of Functions Added by Version Upgrade
. . . . . . . . . . . . . . . . . . . . . . . . page 31 - 19
This section describes the functions added by version
upgrade of GT Designer2 or OS.
Descriptions given in this chapter
This section describes only the connection for using the gateway function.
For details of the gateway function, refer to the following manual.
GOT1000 Series Gateway Functions Manual.