Mitsubishi GOT1000 Series - Page 331

8.3 PLC Side Setting
8.3.2 Connecting to Ethernet module (QnA Series)
8 - 27
1
OVERVIEW
2
BUS CONNECTION
3
DIRECT CONNECTION TO CPU
4
COMPUTER LINK CONNECTION
5
MELSECNET/10 CONNECTION (PLC TO PLC NETWORK)
6
CC-Link CONNECTION (INTELLIGENT DEVICE STATION)
7
CC-Link CONNECTION (Via G4)
8
ETHERNET CONNECTION
When the switch setting has been changed
Turn the PLC CPU OFF then ON again, or reset the PLC CPU.