15 - 20
15.3 Preparatory Procedure for Monitoring
15.3.2 Checking OS installation on GOT
15.3.2 Checking OS installation on GOT
Check if the OS is properly installed or not on the Drive information tab of GT Designer2.
For the operation on the Drive information tab, refer to the following manual.
GT Designer2 Version Basic Operation/Data Transfer Manual
The OS has been installed successfully on the GOT
if the following can be confirmed:
1) Standard monitor OS
2) Communication driver: YASKAWA
GL/CP9200(SH/H)/CP9300MS
To Next Page
Loading...
