17 - 14
17.3 Preparatory Procedures for Monitoring
17.3.3 Setting communication interface (Communication settings)
2 Communication detail settingss
(1) AB SLC500, AB 1:N
Item Description Range
Transmission Speed
Set this item when change the transmission speed used for
communication with the connected equipment.
<Default: 19200bps>
4800bps, 9600bps,
19200bps
Adapter Address
Specify the adapter address (station No. of the PLC that the
GOT will monitor) in the connected network.
<Default: 0>
0 to 31
Host Address
Specify the host address (station No. of the adapter to which
the GOT is connected) in the connected network.
<Default: 1>
1 to 31
To Next Page
Loading...
