19 - 56
19.5 Message Formats
19.5.6 Formats 11 to 13 (Digital Electronics Corporation's memory link method)
(2) Set clock data (M) command
The following shows an example of setting the clock data of GOT.
(Assuming that the clock data is to be set to "2004, June 1, 18:46:49 Tuesday".)
When a wrong day of the week has been set by the clock data setting command
If a wrong day of the week is set by the clock data setting commands, the clock data
will differ from the time displayed on the utility.
Example: When June 1, 2004 (Thursday) is set by the clock data setting
command(the actual day of week is Tuesday), Tuesday (TUE) will be
displayed on the utility time display.
Item Message format
Request message
(host GOT)
Example: Format 13 (Digital Electronics Corporation's memory link method (extended mode, ASCII code 1:n))
Response
message during
normal
communication
(GOT host)
Example: Format 13 (Digital Electronics Corporation's memory link method (extended mode, ASCII code 1:n))
Response
message during
faulty
communication
(GOT host)
Example: Format 13 (Digital Electronics Corporation's memory link method (extended mode, ASCII code 1:n))
Time display
2004/06/01 18:46:49
TUE
After execution
Sum check is performed in this range.
05
H
ENQ
(H) (L)
9A
39
H 41H
Sum
Check
(H) (L)
Station No.
0
30
H
0
30
H 1BH
ESC
4D
H
M
0D
H
CR
0A
H
LF
(H) (L)
Year data
04
30
H 34H
(H) (L)
Month data
06
30
H 36H
(H) (L)
Day data
01
30
H 31H
(H) (L)
Hour data
18
31
H 38H
(H) (L)
Minute data
46
34
H 36H
(H) (L)
Second data
49
34
H 39H
(H) (L)
Day-of-
week data
02
30
H 32H
*1
Following
*1
Com-
mand
06H
ACK
(H) (L)
30
H
Station No.
0
30
H
0
0D
H
CR
0A
H
LF
The above is a case where the sum
check error (06
H) has occurred.
15
H
NAK
(H) (L)
30
H 36H
Error code
(H) (L)
30
H
Station No.
0
30
H
006
0D
H
CR
0A
H
LF
To Next Page
Loading...
Need help?
General
