19 - 72
19.5 Message Formats
19.5.7 Formats 14, 15 (GOT-F900 series microcomputer connection)
4 Error code list
When faulty, the error code is stored in SD2.
For details of error code stored in SD2, the error contents, cause and measures, refer to the following:
Section 19.4.5
Details and actions for errors (error codes) stored into SD2
When an error other than those to be stored in SD2 occurs, at faulty, only the NAK response is
executed.
5 Precautions
(1) Batch reading/writing crossing over different devices
When using the batch read (0, A) or batch write (1, B) command, do not batch read/write crossing
over different devices.
This will cause an error response.
To Next Page
Loading...
