Mitsubishi GOT1000 Series - Page 87

2.2 Preparatory Procedures for Monitoring
2.2.3 Setting communication interface (Communication settings)
2 - 35
1
OVERVIEW
2
BUS CONNECTION
3
DIRECT CONNECTION TO CPU
4
COMPUTER LINK CONNECTION
5
MELSECNET/10 CONNECTION (PLC TO PLC NETWORK)
6
CC-Link CONNECTION (INTELLIGENT DEVICE STATION)
7
CC-Link CONNECTION (Via G4)
8
ETHERNET CONNECTION
Section 2.4
Communication
Check Sheet
Write down the items selected in this section to the check sheet.
Communication setting. (Stage No., Slot No.)
Section 2.4
Communication
Check Sheet
When using the bus extension connector box, mark the check sheet after confirming
that the Stage No. of the GOT is the same as the Stage No. of the bus extension
connector box.
Unit selection (Bus extension connector box/Bus connector conversion box)
Write Check
Sheet
Check