3 - 6 MC909X User Guide
Figure 3-8
ActiveSync Connected Window
During the first synchronization, information stored on the mobile computer is copied to the host computer. When
the copy is complete and all data is synchronized, the mobile computer can be disconnect from the host computer.
For more information about using ActiveSync, start ActiveSync on the host computer, then see ActiveSync Help.
Synchronization with a Windows Mobile 5.0 Device
To synchronize with a Windows Mobile 5.0 device:
1. If the Get Connected window does not appear on the host computer, select Start > All Programs > Microsoft
ActiveSync.
Figure 3-9
Synchronization Setup Wizard Window
NOTE The first ActiveSync operation must be performed with a local, direct connection. To retain partnerships after a
cold boot, capture partnership registry information in a .reg file and save it in the Flash File System, detailed
information is provided in the SMDK Windows CE Help File for Symbol Mobile Computers.
NOTE When a mobile computer with Windows Mobile 5.0 is connected to a host computer and an ActiveSync
connection is made, the WLAN and WWAN radios (if applicable) are disabled. This is a Microsoft security
feature to prevent connection to two networks at the same time.
To Next Page
Loading...
Need help?
General