Using iDockIt B - 11
9. You should not need to change any TCP/IP settings unless directed by your ISP or network administrator. Tap
Next and then tap Finish in the next server address dialog.
The new modem connection is in the drop-down list.
Edit an Existing Modem Connection
1. In the Connect using list, select the modem connection you need to modify.
2. Tap Edit.
3. In the Connection Properties dialog, make any necessary changes to the connection name, modem, or modem
configuration options. Tap
Next to continue or OK to close the dialog.
4. If you continue, you can change the access phone number. Tap Next to continue or OK to close the dialog.
5. If you continue, you can change your login information. If you need to make any TCP IP setting changes, tap
Next. Otherwise, tap OK to close the dialog.
Delete an Existing Modem Connection
1. In the Connect using list, select the modem connection you want to delete.
2. Tap and hold the Connect using box until the pop-up menu displays.
3. Select Delete from the pop-up menu.
4. A dialog is displayed prompting you to conform that you want to delete the modem connection. Tap Yes.
The modem connection is removed from the drop-down list.
To Next Page
Loading...
