Motorola MC909X - Clearing the Log; Versions Window; Wireless Diagnostics Application

4 - 30 MC909X Integrator Guide
Clearing the Log
To clear the log, tap Clear.
Versions Window
The Versions window displays software, firmware, and hardware version numbers. This window only updates when
it is displayed. There is no need to update constantly. The content of the window is determined at runtime, along
with the actual hardware and software to display in the list. Executable paths of the software components on the list
are defined in registry, so that the application can retrieve version information from the executable. “File not found”
appears if the executable cannot be found at the specified path.
To open the
Versions window, tap Versions in the Wireless Status window.
Figure 4-42 Versions Window
The window displays software version numbers for the following:
• Configuration Editor (Fusion 2.4 and lower only)
• Fusion Build
• LoginService
• PublicAPI (Fusion 2.5 and higher only)
• Photon10
• WCConfigED
• WCDiag
• WCLaunch
• WCSAPI
• WCSRV
• WCStatus.
Wireless Diagnostics Application
The Wireless Diagnostics application window provides links to perform ICMP Ping, Trace Routing, and Known APs.
To open the
Wireless Diagnostics window, tap the Signal Strength icon > Wireless Diagnostics.