Motorola MC909X - Configuring Idockit for Windows; Quick Start

B - 12 MC909X Integrator Guide
Configuring iDockIt for Windows CE 5.0
To run iDockIt, tap Start > Programs > iDockIt. When iDockIt is running, the icon appears in the Task Tray. Tap
the icon to display the iDockIt menu.
Figure B-7 iDockIt Menu
• Status displays the Status tab.
• Settings displays the Settings tab for the current connection or, if the mobile computer is not connected to a
host computer via a cable or cradle, the most recently viewed settings tab.
• Enable is a toggle switch that checks/unchecks the Enable iDockIt setting on the General tab.
• Modem Connect is enabled when you have defined a modem connection in the modem settings tab. Tapping
this item when the mobile computer is in the modem cradle initiates dial-out.
• About displays version and copyright information.
• Exit disables iDockIt and closes the application.
iDockIt includes five tab pages:
• General - General setup options for enabling/disabling iDockIt and displaying status and other information.
• Ethernet - Settings for what iDockIt should do when it detects that the mobile computer is in an Ethernet
cradle.
• Direct - Settings for what iDockIt should do when it detects that the mobile computer is in a Serial or USB
cradle or connected to a host computer using a Serial or USB cable.
• Modem - Settings for what iDockIt should do when it detects that the mobile computer is in a Modem cradle.
• Status - Current connection status, continuously updated, scrollable window.
Quick Start
Follow these guidelines. Refer to sections of this document devoted to individual tabs for details on settings and
options