B - 18 MC909X Integrator Guide
Launch ActiveSync
Check this option to have iDockIt launch ActiveSync when you cradle the mobile computer. ActiveSync connects to
the host computer specified in the
Sync with option on your network.
•
Sync with
Your handheld mobile computer can have partnerships with up to two host computers. This list shows only
the host computers with which the mobile computer has a partnership. Select the host computer with which
you want ActiveSync to sync data.
•
Disconnect after sync
Check this option to disconnect automatically from the selected host computer when ActiveSync has
completed synchronization.
Establish Network Connection
Check this option to have iDockIt establish a connection to your network when you cradle the mobile computer.
If you check this option,
Launch ActiveSync is automatically unchecked.
You can check this option in conjunction with
Launch application. After iDockIt establishes the network connection,
it launches the specified application.
Launch Application
Check this option to have iDockIt launch the selected application when you place the mobile computer in the
cradle. iDockIt uses the specified command line parameters. You must select an application to launch.
If you check this option,
Launch ActiveSync is automatically unchecked.
Select...
1. Tap the Select button to open the Select Auto-Launch Application dialog.
2. Select a File Type in the drop-down list.
3. Select a Folder (as needed).
4. Select a file name in the list.
5. Use the input panel to specify command line parameters.
6. Tap OK at the top of the screen.
The selected application appears in the settings tab.
Serial Port Baud Rate
This option allows you to specify the baud rate iDockIt should use for a serial connection to the Ethernet cradle. Set
this rate to match the baud rate configured for the cradle. For maximum performance, always use the maximum
baud rate of 115200.
NOTE Before you can select this option, you must connect to the host computer with a serial or USB cable or cradle
and use ActiveSync to set up a partnership with that host computer.
Checking this option automatically unchecks Establish network connection and Launch application.
Similarly, checking either one of those options automatically unchecks Launch ActiveSync.
To Next Page
Loading...
