Wireless Applications 4 - 35
Figure 4-48
Regulatory Options Dialog Box
Band Selection
The Band Selection settings identify the frequency bands to scan when finding WLANs. These values refer to the
802.11 standard networks.
Figure 4-49
Band Selection Dialog Box
Tap
Save to save the settings or tap X to discard any changes.
System Options
Use System Options to set miscellaneous system setting.
Table 4-25
Regulatory Options
Field Description
Settings Select the country from the drop-down list. To connect to a profile, the profile country must
match this setting, or the AP country setting if you selected the Enable 802.11d check box.
Enable 802.11d The WLAN adapter attempts to retrieve the country from APs. Profiles which use
Infrastructure mode can only connect if the country set is the same as the AP country
settings or if the profile country setting is Allow Any Country. All APs must be configured to
transmit the country information.
NOTE Select one band for faster access when scanning for WLANs.
Table 4-26
Band Selection Options
Field Description
2.4GHz Band The Find WLANs application list includes all networks found in the 2.4 GHz band (802.11b and
802.11g).
5GHz Band The
Find WLANs application list includes all networks found in the 5 GHz band (802.11a).
To Next Page
Loading...
Need help?
General