Using iDockIt B - 19
If using a USB-to-Ethernet cradle, the USB driver automatically controls the connection speed.
Direct (Serial/USB) Settings
If you use a serial or USB cradle or connect to the mobile computer with a serial or USB cable, you can
automatically connect to the connected host computer or network OR you can choose a host computer with which
you have set up a partnership using ActiveSync. Alternatively, if your host computer supports RAS connections you
can connect to your network through your host computer and/or launch a specified application on the mobile
computer.
Figure B-11
Direct (Serial/USB) Settings Tab
Launch ActiveSync
Check this option to have iDockIt launch ActiveSync when you place the mobile computer in a serial or USB cradle
or when you connect it to a serial or USB cable.
•
Sync with:
When this option is not checked, the mobile computer synchronizes data with the host computer to which it is
connected. To synchronize with a different host computer, check this option and select the host computer in
the list.
ActiveSync is able to connect to this alternate host computer automatically ONLY IF you check this option.
•
Disconnect after sync is available only if you select this option.
•
Disconnect after sync
Check this option to disconnect automatically from the host computer when ActiveSync has completed
synchronization.
Establish Network Connection
Check this option to have iDockIt establish a connection to your network when you place the mobile computer in a
serial or USB cradle or connect it to a serial or USB cable. In order to establish a connection to your network, you
must connect the mobile computer to a host computer with a RAS server. If you have ActiveSync running on your
host computer, it can be used as a RAS server.
If you check this option,
Launch ActiveSync is automatically unchecked.
NOTE Checking this option automatically unchecks Establish network connection and Launch application. Similarly,
checking either one of those options automatically unchecks Launch ActiveSync.
To Next Page
Loading...
Need help?
General