Getting Started 2 - 35
Figure 2-43
Dial-Up and Dial Properties Window
Modem Country Setup
Edit the Extra dial-string modem commands: text box in the mobile computer to set country parameters. The syntax
used is: +GCI=<country_code>.
Supported Countries
AT Commands
The AT Command Set allows you to custom-configure the modem.
Table 2-9
Supported Countries
Country Code Country Code Country Code
Australia 09 Greece FD or 46 Norway FD or 82
Austria FD or 0A Iceland FD Portugal FD or 8B
Belgium FD or 0F Ireland FD or 57 Spain FD or A0
Brazil 16 Italy FD or 59 Sweden FD or A5
Canada 20 Liechtenstein FD Switzerland FD or A6
Denmark FD or 31 Luxembourg FD TBR-21 (Europe) FD
Finland FD or 3C Mexico 73 United Kingdom FD or B4
France FD or 3D Netherlands FD or 7B United States B5 (Default)
Germany FD or 42 New Zealand 7E
Note:
Use FD where possible. If connection problems occur, use the alternate code where provided.
NOTE Only experienced users having difficulty with default settings should use this feature.
To Next Page
Loading...
Need help?
General