Motorola MC909X User Manual

Using iDockIt B - 9
2. Select a File Type in the drop-down list.
3. Select a Folder (as needed).
4. Select a file name in the list.
5. Use the input panel to specify command line parameters.
6. Tap OK at the top of the screen.
The selected application appears in the settings tab.
Serial Cradle Baud Rate
This option allows you to specify the baud rate iDockIt should use for a serial cable or cradle. Set this rate to match
the host computer that the cradle or cable is connected to.
If you are using a USB cradle or cable, the USB driver automatically determines the connection speed.
Modem Cradle Settings
If you use a modem cradle, you can automatically connect to a remote host computer or network or you can
synchronize with a host computer with which you have set up a partnership using ActiveSync. Alternatively, you
can connect to your network and/or launch a specified application on the mobile computer.
Figure B-6 Modem Settings Tab
Launch ActiveSync
Check this option to have iDockIt launch ActiveSync when you place the mobile computer in a modem cradle.
Establish Network Connection
Check this option to have iDockIt establish a network connection when you place the mobile computer in a modem
cradle. iDockIt uses the modem connection specified in the
Connect using list in this tab.
If you check this option,
Launch ActiveSync is automatically unchecked.
NOTE Checking this option automatically unchecks Establish network connection and Launch application.
Similarly, checking either one of those options automatically unchecks Launch ActiveSync.

Motorola MC909X Specifications

General

Brand	Motorola
Model	MC909X
Category	Handhelds
Language	English