4 - 34 MC909X Integrator Guide
•
System Options
•
Change Password
•
Export.
Operating Mode Filtering
The Operating Mode Filtering options cause the Find WLANs application to filter the available networks found.
Figure 4-47
OP Mode Filtering Dialog Box
The
AP Networks and Ad-Hoc Networks check boxes are selected by default.
Tap
Save to save the settings or tap X to discard any changes.
Regulatory Options
Use the Regulatory settings to configure the country the mobile computer is in. Due to regulatory requirements
(within a country) a mobile computer is only allowed to use certain channels.
Table 4-24
OP Mode Filtering Options
Field Description
AP Networks Select the AP Networks check box to display available AP networks and their signal
strength within the
Available WLAN Networks (see Find WLANs Application on page
4-5). These are the APs available to the mobile computer profile for association. If
this option was previously disabled, refresh the
Available WLAN Networks window to
display the AP networks available to the mobile computer.
AD-Hoc Networks Select the
Ad-Hoc Networks check box to display available peer (adapter) networks
and their signal strength within the
Available WLAN Networks. These are peer
networks available to the mobile computer profile for association. If this option was
previously disabled, refresh the
Available WLAN Networks window to display the Ad
Hoc networks available to the mobile computer.
To Next Page
Loading...
